Electric fireplaces are a great way to enjoy the ambiance and warmth of a fireplace without having to worry about smoke or sparks. If you have an electric fireplace, you often use it during the colder months. However, there may be occasions when you need or want to turn it off.
So whether you’re heading out of town for a weekend or want to enjoy the peace, here’s how to turn off electric fireplace. This guide will show you how to turn off two types of electric fireplaces, those with a switch and those with a remote. Read on for more information.
Why Should You Turn Off Electric Fireplace?
There are a few reasons why you would want to turn off your electric fireplace. The most obvious reason is to conserve energy. Electric fireplaces can use a lot of electricity, so turning them off when you’re not using them can help save on your energy bill.
Another reason to turn it off is to prevent fires. Electric fireplaces can get very hot; if left on for too long, they could start a fire. So, it’s always best to err on the side of caution and turn off your electric fireplace when you’re not using it. Finally, turning off your electric fireplace will help prolong its lifespan. If the fireplace is left on all the time, it will eventually overheat and break. But if you turn it off when you’re not using it, you’ll help extend its lifespan.
Step by Step Instructions: How to Turn Off Electric Fireplace
Step 1: Locate the Switch.
The switch is usually located on the wall near the fireplace. However, it may be hidden behind a small plate or near the room’s light switch. In addition, the switch may be located inside the unit if your electric fireplace is built into the wall.
Step 2: Turn Off the Switch.
Once you have located the switch, turn it to the “off” position. This will cut off power to the fireplace and prevent it from turning on. If your electric fireplace has a remote control, you can also use the remote to turn off the fireplace.
Step 3: Unplug the Fireplace.
After you have turned off the switch, it is a good idea also to unplug the fireplace from the wall outlet. This will ensure no power goes to the fireplace and prevent it from turning on accidentally.
Step 4: Wait for the Fireplace to Cool.
If you have used the fireplace recently, you will need to wait for it to cool before turning it off. This is because the elements inside the fireplace can stay hot for some time after being turned off. Once the fireplace has cooled, you can safely turn it off and unplug it.
Step 5: Clean the Fireplace.
Once the fireplace has cooled, you can clean it according to the manufacturer’s instructions. This will help keep the fireplace in good condition and prevent any problems. Make sure that the area around the fireplace is clear of any combustible materials before you begin cleaning.
Step 6: Store the Fireplace.
Once you have finished cleaning the fireplace, you can store it in a dry, cool place. Ensure the fireplace is completely dry before you store it, as this will prevent any mold or mildew from developing. If the fireplace is wet, you can use a hairdryer to dry it off before storing it. Once the fireplace is dry, you can wrap it in a clean, dry towel or blanket to protect it from dust and dirt.
Step 7: Enjoy Your Quiet Fireplace.
Now that you know how to turn off electric fireplace, you can enjoy the beauty and warmth of a quiet fire without worry. Make sure to follow these steps every time you want to turn off your fireplace to ensure that it stays in good working condition.
You Can Check It Out to Reset Apollo Gate Opener
Some Helpful Tips and Advice When Using Electric Fireplace
- Check if the area around the electric fireplace is clear of any flammable materials.
- Make sure that the power cord is not damaged and is not in contact with any water.
- Do not use extension cords with electric fireplaces.
- Do not use an electric fireplace if it has been damaged.
- Do not leave an electric fireplace unattended while turning on.
- Turn off the electric fireplace before going to bed or leaving the house.
- Do not use an electric fireplace if you are influenced by alcohol or drugs.
- Do not allow children or pets near an electric fireplace.
Other Alternative Ways to Turn Off Electric Fireplaces
1. Use the Switch on the Wall:
Locate the switch on the wall near your electric fireplace. This is typically a light switch; toggling it off will turn off your electric fireplace. If you want to ensure that your electric fireplace is turned off, you can remove the switch plate and disconnect the wires.
2. Use the Remote Control:
If your electric fireplace comes with remote control, you can use that to turn off the fireplace. Point the remote at the fireplace and press the “off” button. Make sure the batteries in the remote are fresh so that the remote will work.
3. Unplug the Fireplace:
If you want to be sure that your electric fireplace is turned off, you can unplug it from the outlet. However, remember that you’ll need to plug it back in when you want to turn it on again. Also, check if the fireplace has a backup battery in a power outage.
4. Turn Off the Circuit Breaker:
If you want to be extra cautious, you can turn off the circuit breaker that supplies power to the electric fireplace. That way, your fireplace will remain turned off even if there’s a power outage.
Of course, this means that you’ll need to know where your home’s circuit breaker box is located, and you’ll need to know which breaker controls the power to the fireplace. If you’re uncomfortable working with electricity, it’s best to leave this task to a professional electrician.
5. Remove the Power Cable:
If you want to ensure that your electric fireplace can’t be turned on accidentally, you can remove the power cable from the outlet. Just keep track of where you put the power cable, so you can easily reconnect it when you want to turn on the fireplace again. Be sure to wait at least 15 minutes after disconnecting the power before reconnecting it to give the fireplace time to cool down.
When Should You Turn Off Electric Fireplace?
You should turn off your electric fireplace when you leave the house or go to bed. You may also want to turn it off during the day if the room gets too warm. In addition, if the power goes out, you will need to turn off the fireplace to prevent it from overheating when the power comes back on.
To turn off your electric fireplace, find the switch or remote control and set it to the “off” position. For safety, always ensure the fire is completely extinguished before turning off the power. If you have any concerns, consult your fireplace’s owner’s manual.
How To Control The Flames On An Electric Fireplace?
If you want to adjust the height of the flames on your electric fireplace, there are a few things that you need to do. First, you need to find the control knob. This is usually located on the right side of the fireplace. Once you have found the control knob, turn it to the left or right until it reaches the desired height.
If you want to turn the electric fireplace off completely, a switch is usually located on the wall near the fireplace. Alternatively, there may be a remote control that you can use to turn the fireplace off. Once you have found the switch or remote, turn it to the “off” position.
Conclusion
Electric fireplaces provide an inviting atmosphere and ambiance for any room. They are also cost-effective for heating a room without using gas or other methods. If you have an electric fireplace, knowing how to turn it off is important in case of emergencies or if you need a break from the heat.
Follow these simple steps on how to turn off electric fireplace, and you’ll be able to power down your electric fireplace in no time. But remember, always ensure the fire is extinguished before you turn off the power. If you have any questions or want to know more, feel free to comment below!
