If you’ve accidentally poured bleach into your LG washer while cleaning a stained shirt, you know how frustrating it can be to try and get the bleach dispenser out. This guide will teach you how to remove bleach dispenser from LG washer quickly and easily.
We will also provide some tips for those who encounter difficulties with any methods. Remember that different models may have different instructions, so consult your owner’s manual if you are unsure. With these simple steps, you’ll be removing that pesky bleach dispenser in no time! Read on for more information.
7 Effective Ways on How to Remove Bleach Dispenser From Lg Washer
1. Using a Putty Knife:
If you have a putty knife, you can use it to remove the bleach dispenser from your LG washer. First, locate the seam between the dispenser and the washer. Then, gently insert the blade of the putty knife into this seam and apply pressure. The dispenser should pop right off. If it doesn’t, try wiggling the knife back and forth until it comes loose.
2. Using a Screwdriver:
Another tool that can be used to remove the bleach dispenser from an LG washer is a screwdriver. Start by finding the seam between the dispenser and the washer again. This time, insert the screwdriver tip in the seam and pry the dispenser away from the washer. Again, you may need to use some force to get it started, but once you do, the dispenser should come right off.
3. Using a Spudger:
For those who don’t have a putty knife or screwdriver on hand, a spudger can also be used to remove the bleach dispenser from an LG washer. Start by locating the seam between the dispenser and the washer. Then, gently insert the tip of the spudger into this seam and apply pressure. The dispenser should pop right off. If it doesn’t, try wiggling the spudger back and forth until it comes loose.
4. Use a Sponge or Clean Towel:
If you don’t have any tools on hand, you can also try using a sponge or clean towel. Start by soaking the sponge or towel in hot water. Then, apply it to the seam between the dispenser and the washer.
The heat will help loosen the adhesive holding the dispenser in place. After a few minutes, pry the dispenser off with the sponge or towel. If it’s still not budging, you can try using a little more force. Just be careful not to damage the washer in the process.
5. Using a Rubber Band:
If you have a rubber band, you can use it to open the dispenser lid. Place the rubber band around the lid and twist it until the lid pops off. Be careful when doing this, so you don’t damage the lid.
You can use a knife to open the dispenser lid if you don’t have a rubber band. Carefully insert the knife blade under the lid and twist it until the lid pops off. Again, be careful when doing this so you don’t damage the lid.
6. Remove Dispenser Cups and Drawer:
If your LG washer has a dispenser cup or drawer, you will need to remove this before you can remove the bleach dispenser. Start by pulling on the cup or drawer until it pops out. Then, locate the two screws that hold the dispenser in place. Remove these screws and set them aside. Now, you should be able to pull the dispenser out of the washer.
7. Disconnect Wiring Harness:
A wiring harness runs from the bleach dispenser to the control panel. You will need to disconnect this harness before completely removing the dispenser. To do this, unplug the harness from the back of the dispenser. Once it is disconnected, you should be able to remove the dispenser completely.
Step by Step Guide: How to Remove Bleach Dispenser From Lg Washer
Step 1: Turn Off Your Lg Washer.
Before you attempt to remove the bleach dispenser, you’ll need to ensure that your Lg washer is turned off. To do this, locate the power button on your machine and press it until the washer’s display goes blank.
Step 2: Unplug Your Lg Washer from the Power Outlet.
Once your washer is turned off, you’ll need to unplug it from the power outlet. This is an important safety step, as it will prevent you from accidentally turning on your machine while working on it. Ensure the power cord is completely disconnected from the outlet before proceeding.
Step 3: Locate the Bleach Dispenser on Your Washer.
The bleach dispenser is typically located on the top or side of your washer, near the detergent dispenser. If you’re having trouble finding it, consult your washer’s manual. When the bleach dispenser is empty, it usually has a white or clear plastic cap.
Step 4: Unscrew the Cap From the Dispenser.
Using your fingers or a small wrench, unscrew the cap from the bleach dispenser. If the cap is tight, try squirting a little bit of dish soap onto the threads to help loosen it. When the cap is loose, pull it straight up to remove it.
Step 5: Remove the Bleach Dispenser.
Pull the bleach dispenser straight out of the washer. You may need to wiggle it a bit if it is stuck to release it. While removing the dispenser, check to see if there is any debris or buildup on the inside. If there is, clean it off with a cloth or sponge before putting the dispenser back in.
Step 6: Clean the Bleach Dispenser Opening.
Once the bleach dispenser is removed, look at the opening where it was attached to the washer. There may be some bleach residue present, so it’s a good idea to clean this area before reattaching the dispenser. Use a soft cloth dampened with water to wipe away any residue.
Step 7: Rinse Off the Cap and Dispenser.
Rinse the cap and dispenser off with clean water. If there is any bleach residue on either the cap or dispenser, use a clean cloth to wipe it away. When the cap and dispenser are clean, dry them off with a clean towel. If you’re using a self-cleaning cycle on your LG washer, clean the bleach dispenser before starting the cycle.
Step 8: Reassemble the Dispenser.
Once the bleach dispenser is dry, you can reassemble it. Start by screwing the cap back onto the dispenser. Make sure the cap is screwed on tightly so no bleach will leak out.
Next, insert the dispenser into the bleach compartment of your LG washer. Ensure the dispenser is inserted all the way and the locking tab is in place. Finally, screw the retaining nut back onto the dispenser. Again, make sure this is screwed on tightly to avoid any leaks.
If your LG washer has a different type of bleach dispenser, the steps for removing and cleaning it may vary slightly. Consult your washer’s manual for specific instructions.
You Can Check It Out to Bleach Comforter
Some Helpful Tips and Suggestions
Here we have given tips on how to remove bleach dispenser from LG washer.
- Unplug the machine from the power outlet.
- Locate the bleach dispenser on the top front of the machine.
- Remove the two screws holding the dispenser with a Phillips head screwdriver.
- Pull the dispenser out of its housing and away from the machine.
- Clean the housing and the dispenser with a soft cloth and mild detergent.
- Rinse the bleach dispenser thoroughly with clean water.
- When the dispenser is dry, reattach it to the machine by screwing it back into place.
When Should You Remove Bleach Dispenser From Lg Washer?
If you notice that your bleach dispenser is starting to leak, removing and cleaning it as soon as possible is a good idea. A leaking dispenser can cause damage to your washer, so it’s best to take care of the problem immediately. You should also remove and clean the dispenser if it becomes clogged with detergent or fabric softener.
To remove the bleach dispenser from your LG washer, start by unplugging the washer from the power outlet. Then, open the washer door and remove any laundry that may be inside. Next, locate the two screws that secure the dispenser to the washer’s control panel. Then, use a Phillips head screwdriver to remove the screws and pull the dispenser away from the control panel.
Finally, disconnect the bleach dispenser hose from the inlet valve by pushing on the quick-connect fitting. Once the hose is disconnected, you can lift the dispenser out of the washer. To clean the dispenser, rinse it out with warm water. If the dispenser is still clogged, you may need to use a small brush to clean it out. Once you’re finished cleaning the dispenser, reassemble your washer and plug it back into the power outlet.
To remove the bleach dispenser from an LG washer, you will need a screwdriver. The screws that hold the bleach dispenser are located on the front of the washer. Once you have removed the screws, gently pull on the bleach dispenser, which should come right off. There is no need to disconnect any wires or hoses. If your bleach dispenser is damaged or broken, you can purchase a new one at most hardware stores.
Follow these same instructions to install it. LG makes both plastic and metal bleach dispensers, so be sure to choose the correct one for your washer model. We hope this guide on how to remove bleach dispenser from LG washer has been helpful. If you have any questions, please feel free to leave a comment below. Thanks for reading!