How to Test Auger Motor in Pellet Stove

Testing the auger motor in your pellet stove is important because it ensures that the fuel is being delivered to the firebox efficiently. Any issues with the auger motor can cause poor combustion and lead to dangerous situations like smoke and carbon monoxide buildup in your home. This can be avoided by periodically testing the auger motor to ensure it functions properly.

You can do a simple test at home to determine whether or not the motor is the problem. First, locate the auger motor. It will be near the bottom of the stove, with two wires coming out of it. Once you have found the motor, disconnect one of the wires. Then, use a multimeter to test for continuity between the two terminals on the motor. If there is continuity, then the motor is likely not the problem. In this blog post, You will learn in detail how to test auger motor in pellet stove.

How to Test Auger Motor in Pellet Stove

Step-by-Step Processes for How to Test Auger Motor in Pellet Stove 

Step 1:  Turn off the Power

Before starting any kind of repair or maintenance task, the first step should always be to turn off all power sources. For a pellet stove, you need to unplug the unit from its electrical outlet and turn off any gas valves that may supply it with fuel.

Step 2: Open Up the Unit

Once all power sources are turned off, you need to remove any panels or covers that will give access to the stove’s interior. This will usually require some kind of screwdriver and a few minutes of work. Once you have opened up the pellet stove, find and check the auger motor fuse for any signs of damage. If it looks fine, then you can move on to the next step.

Step 3: Remove Auger Motor 

Once you have confirmed that the fuse is not damaged, locate and remove the auger motor from the pellet stove. This usually involves unscrewing a few screws and disconnecting wiring harnesses connecting the motor to the unit.

Remove the Auger Motor From the Pellet Stove

Step 4: Set Up a Power Source 

To test the auger motor, you will need an external power source, such as a battery or voltage regulator. Connect your chosen power source to the auger motor and ensure it provides the correct voltage.

Step 5: Test Auger Motor 

Once the power source is connected, you can test the auger motor by turning it on and listening for any noise or vibration. If it produces sound, then it is likely to be working properly.

Step 6: Check Motor Speed 

If you want to ensure that the auger motor is working correctly, you will need to check the speed at which it is running. Most pellet stoves come with a built-in gauge that will show you how fast the motor is spinning, or you can purchase an aftermarket tachometer to measure it yourself.

Step 7: Replace the Motor if Necessary 

After testing and checking the auger motor, you may need to replace it if it is not working correctly. Make sure to purchase a compatible replacement motor and ensure that it is properly connected before turning the power back on.

Ensure That It is Properly Connected

Step 8: Re-Install Parts 

Once you have replaced the auger motor or verified that it is functioning correctly, you can start re-installing any removed parts. Ensure all connections are secure and all covers are properly in place before turning the power back on.

Step 9: Turn On Power Source 

After you have completed the installation or maintenance process, turn on any power sources that were turned off initially. This will allow the pellet stove to operate normally and ensure that your test was successful.

By following these ten steps, you can easily test the auger motor in your pellet stove and ensure that it is functioning correctly. This will help keep your unit running smoothly and reliably for many years.

Tips for How to Test Auger Motor in Pellet Stove 

  1. Always disconnect the power source and allow the apparatus to cool before conducting any maintenance or testing of the auger motor in a pellet stove.
  2. Ensure all safety guards are securely placed before turning on the appliance again.
  3. Wear protective clothing such as eye protection, gloves, and long sleeves when handling the auger motor.
  4. Only use a multimeter to test the voltage of the auger motor and not any other type of testing device.
  5. When reattaching the auger motor, always make sure that all of the wirings is properly connected and securely fastened in place. After completing this step, be sure to turn the power back on and test the motor to ensure that it is working properly.

Following these safety tips will help ensure that testing an auger motor in a pellet stove is performed safely and successfully.

Make Sure That All of the Wirings is Properly

How Often Should the Auger Motor Be Tested?

The auger motor in a pellet stove should be tested regularly to ensure it is functioning properly. How often the auger motor should be tested will depend on how often the stove is used and how heavily it is used. Generally, testing the auger motor every six months or so should be sufficient. However, if you use the stove frequently and heavily, you may want to test it more often.

To test the auger motor, gently push the lever that activates it to ensure there is no resistance, and it moves freely. If you feel any resistance or it does not move, this could indicate a problem with the motor and should be looked at by a qualified technician. When releasing the lever, listen carefully for any grinding or squealing noises that could indicate wear and tear on the motor.

Once you have checked all of these things, you can turn the power back on and check that the auger motor is moving properly when activated. This can be done by filling up the hopper with pellets and watching them feed into the burn pot. If the auger does not start feeding pellets, you may need to replace the auger motor.

How Can You Test the Auger Motor for Efficiency and Wear?

Testing the auger motor in a pellet stove is important for maintenance and efficiency. Here are the steps to test the auger motor:

  • Start by unplugging the power supply to your stove. Be sure that any combustible material is far away before unscrewing or moving any parts of the stove.
  • Locate your auger motor and examine the wire connections to ensure all wires are properly connected. If a connection is loose, tighten it up before proceeding.
  • Use a small screwdriver or pair of needle-nose pliers to check the power cord inlet for any visible damage or signs of wear.
  • Plug the power supply back into the wall and switch it on.
  • Press the test button to spin the auger motor. If it fails to spin, check for any blockages or impediments that might be causing a problem with the operation. You may need to release particles from their chamber using a vacuum or other methods.
  • If the motor does spin, it should do so for at least 10-15 seconds before stopping. This is a sign of efficient operation, and you should be able to move on with the normal operation of your stove.
  • Lastly, inspect the auger motor for any signs of wear, such as cracked or brittle parts or any corrosion. If you see anything out of the ordinary, it is best to replace it with a new one for optimal performance.
Press the Test Button to Spin the Auger Motor

Is It Necessary to Call Any Professional to Test Auger Motor in Pellet Stove?

You must call a professional to test the auger motor if you have a pellet stove. The auger moves the pellets from the hopper to the burn pot. If the motor is not working properly, the pellets will not be fed into the fire, and the stove will not operate correctly. There are two ways to test the auger motor. The first is to turn on the stove and let it run for a few minutes.

Then, open the door and watch to see if the pellets are being fed into the fire. If they are not, then the motor is not working properly. The second way to test the motor is to disconnect it from the electrical supply and try to rotate it by hand. If it does not rotate, then it needs to be replaced. Most pellet stoves come with a warranty, so if you have a problem with your auger motor, you should call your stove manufacturer and ask for a replacement.

How Much Will It Cost if You Hire a Professional? 

If you don’t feel confident testing your auger motor in a pellet stove on your own, you may wonder how much it will cost to hire a professional. The cost of hiring a professional to test an auger motor can vary depending on the job’s complexity and other factors, such as the type of pellet stove and the condition of the motor. Generally, depending on the job requirements, you can expect to pay anywhere from $50 to $250 or more for a professional to check your auger motor.

If you hire a professional, ask questions about their experience and qualifications so that you know they can complete the job correctly and safely. Additionally, you should always ask for an estimate in writing before agreeing to any services. This will help protect both you and the professional from any unexpected costs or disagreements down the line.


Testing the auger motor in your pellet stove is necessary to keep it running properly. The first thing to do is to check if the plug is connected correctly and that all the wiring is secure. Also, ensure the switch controlling the auger motor has not been damaged or disconnected. 

After these initial steps are taken, you can use a multimeter to check the voltage from the motor. If there is no current, then it is likely that you will need to replace the auger motor or its parts. I hope this article has been beneficial for learning how to test auger motor in pellet stove. Make Sure the precautionary measures are followed chronologically.

You Can Check It Out to Make Boba Candles

Leave a Comment