Tool boxes are a great way to organize and store your tools, but if you don’t have a lock on your box, it can be easy for people to steal your tools. There are a lot of different toolbox locks on the market, and it can be tricky to figure out which one is right for you.
In this blog post, we will teach you how to pick a tool box lock so that you can keep your tools safe and secure. Whether you are using a traditional lock or one of the new electronic locks, we will show you how to pick a tool box lock quickly and easily. Stay safe and secure out in the garage with a locked toolbox!
What Is Lock Picking?
Lock picking is the act of opening a lock without the use of a key. Lock picking can be used for many different purposes, such as opening a locked door without a key or gaining access to a locked toolbox. A lock has a series of pins that must be aligned in order for the lock to open. When you insert a key into a lock, the pins are pushed up and down into different positions, aligning them to open the lock.
Lock picking is simply the act of manipulating the pins in a lock so that they are all aligned, allowing the lock to be opened without a key. While this may sound difficult, it is actually quite simple with a bit of practice.
Types of Tool Box Lock
If you’re looking to how to pick a tool box lock, there are a few different types of locks that you may encounter.
The most common type of lock is the dial, which is what most people think of when they picture a traditional lock. These locks typically have a circular body with a number of tumblers inside. To open the lock, you need to align the tumblers in the correct order so that they all line-up. This can be done by feeling or using a pick tool. Then, you simply turn the dial to the correct position, and the lock will open.
Pin Tumbler Lock
Another type of lock is the pin tumbler lock. This type of lock has a series of pins that need to be aligned in order for the lock to open. To pick this type of lock, you’ll need a tension wrench tool. This wrench is inserted into the keyway and used to apply pressure to the pins. Then, you use a pick to align the pins so that they all line-up. Once they’re all lined up, you can turn the tension wrench and open the lock.
Finally, there are wafer locks. These locks have a series of wafers that need to be aligned in order for the lock to open. To pick this type of lock, you’ll need a tension wrench tool. This wrench is inserted into the keyway and used to apply pressure to the wafers. Then, you use a pick to align the wafers so that they all lineup. Once they’re all lined up, you can turn the tension wrench and open the lock.
Another type of lock is the lever. Lever locks are less common than dial locks, but they’re still relatively easy to find. These locks have a rectangular body with a number of levers inside. To open the lock, you need to push all of the levers up so that they’re in the correct position. This can be done by feel or using a decoder tool.
10 Effective Ways on How to Pick a Tool Box Lock
1. Rotate the Tension Wrench
The tension wrench is inserted into the bottom of the keyway and used to apply torque to the lock plug. The amount of torque you apply with the tension wrench will determine how easy or difficult it will be to pick the pins. If you’re having trouble picking the lock, try rotating the tension wrench.
2. Insert the Pick
Once the tension wrench is in place, insert the pick into the keyway and begin moving it up and down. You’ll feel resistance as you hit each pin, and you’ll need to apply pressure with the tension wrench in order to set them. Be careful not to apply too much pressure, or you may bind the pins and make it impossible to set them all.
3. Use a Spacer
If you’re having trouble getting the tension wrench into the bottom of the keyway, try using a spacer. A spacer is simply a piece of metal or plastic that fits snugly into the keyway and provides a surface for the tension wrench to grip.
4. Apply Pressure
Once all the pins are set, apply pressure to the tension wrench in order to turn the plug. The amount of pressure you need to apply will vary depending on the lock, so you may need to experiment a bit. If you’re having trouble turning the plug, try applying more pressure.
5. Use a Lubricant
If you’re still having trouble picking the lock, using a lubricant can help. WD-40 is one option, but you can also use something like graphite powder or even just soap. Dab a small amount of the lubricant on the keyway and insert your tension wrench and pick again. The added lubrication should make it easier to manipulate the pins.
6. Use a Shim
Try using a shim if you’re having trouble inserting the tension wrench into the keyway. A shim is a thin piece of metal or plastic that can help to widen the keyway so that you can insert the tension wrench. You can purchase a shim online or at a hardware store.
7. Use a Tension Wrench
If you’re having trouble picking the lock, try using a tension wrench. A tension wrench is a tool that’s inserted into the bottom of the keyway and used to apply torque to the lock plug. The amount of torque you apply with the tension wrench will determine how easy or difficult it is to pick the lock.
8. Use a Lock Pick Gun
A lock pick gun is a tool that’s used to quickly and easily pick a lock. The tool consists of a handle connected to a trigger, which is connected to a spring-loaded pin. When the trigger is pulled, the pin strikes the pins in the lock, causing them to spring up and allowing the lock to be opened.
9. Use a Lock Pick Set
A lock pick set is a collection of tools that are used to open a lock without the key. The most basic form of a lock pick set is a tension wrench and a hook.
If you don’t have a lock pick set, you can use a paperclip or bobby pin as a tension wrench and a nail file or straightened out paperclip as a hook. Simply insert the nail file or paperclip into the keyway and feel for the pins. Once you touch one, apply upward pressure until it clicks into place. Repeat this process until all of the pins are set, and the lock opens.
10. Use a Bump Key
A bump key is a specially cut key that can be used to open any lock that it fits into. To use a bump key, insert it into the lock and apply pressure as you turn it. As you turn the key, listen for a clicking sound. This indicates that the pins are aligning and the lock is opening. Continue turning until the lock opens.
With these techniques, you should be able to open just about any locked toolbox. Of course, practice makes perfect, so don’t be discouraged if it takes a few tries to get the hang of it. With a bit of patience and perseverance, you’ll be opening locks like a pro in no time.
How to Pick a Toolbox Lock With Tools – 5 Easy Steps
Step 1. Find the Right Lock.
Many different types and brands of toolbox locks are on the market, so finding the right one is crucial. First, start by taking a look at the different types of locks that are available. The most common type of lock is the pin tumbler lock, which is usually found on household doors and cabinets. These locks have a series of pins that must be aligned for the lock to open.
Step 2. Select the Proper Tools.
Once you have found the right lock, it’s time to select the proper tools for the job. A few common tools that can be used to pick a lock include:
- A tension wrench
- A rake
- A hook
- A pick gun
- A bump key
If you don’t have any of these tools on hand, don’t worry – there are plenty of other household items that can be used in a pinch, like a paperclip or a bobby pin. Just be creative. Once you have your tools, it’s time to get to work.
Step 3. Insert the Tension Wrench Into the Keyway.
The first step in picking a toolbox lock is to insert the tension wrench into the keyway. This is the small hole in the lock where you would normally insert the key. The purpose of the tension wrench is to apply pressure to the pins, which we will talk about more in the next step.
Step 4. Insert the Hook Pick Into the Keyway.
Insert the hook pick into the keyway above the pins with the tension wrench still in place. As you insert the hook pick, apply pressure to the tension wrench in the direction you want the lock to turn. In most cases, you will want to apply pressure to the tension wrench in a clockwise direction.
Step 5. Find the Binding Pin.
The binding pin is the pin that prevents the plug from turning. In most cases, it will be the bottom pin. To find it, apply pressure to the top of the plug with your tension wrench. As you do this, feel for the binding pin with your pick.
When you find it, continue applying pressure to the plug with your tension wrench as you work on that binding pin. If you can’t find the binding pin, try moving your tension wrench to different positions and feeling for the binding pin with your pick.
Tips & Suggestions on How to Pick a Tool Box Lock
- Insert the pick into the top of the lock and begin to work it back and forth. You should feel the pins begin to move as you do this.
- Continue to work the pick until all of the pins are aligned, and the lock opens. If you’re having difficulty, you can try using a different pick or applying more pressure with the tension wrench.
- Once you’ve successfully picked the lock, be sure to reset it before you close the toolbox so that it will be locked the next time you need it.
- If you’re still having trouble, you can try a few other things. You can try using a small screwdriver to apply tension to the pins. With a little patience and practice, you should be able to pick any toolbox lock successfully.
A toolbox is a handy way to organize and store your tools, but it’s only as good as the lock on it. If you have a weak or easily picked lock, your tools may be at risk of theft. Toolbox locks come in a variety of shapes and sizes. You need to find the right one for your toolbox.
There are two general types of toolbox locks: keyed or combination. If you have a keyed lock, make sure you keep the key safe and secure. If you have a combination lock, remember the sequence to open it easily. In this post, we’ll show you how to pick a tool box lock so that you can keep your tools safe and secure.
You Can Check It Out to Pick a Kobalt Toolbox Lock