How to Make Water Hotter in Shower

When it comes to showering, most people want the water as hot as possible. But, unfortunately, the water just doesn’t get hot enough with most showerheads. But there is a way to make your water hotter without going out and buying a new showerhead. Just follow these simple steps on how to make water hotter in shower.

How to Make Water Hotter in Shower

Can You Make the Water Hotter in The Shower?

Many people enjoy a hot shower, but sometimes the water doesn’t seem hot enough. A few things can be done to make the water hotter in the shower. One is to adjust the water heater. The temperature on the water heater should be turned up until the desired temperature is reached. It may take a little trial and error to find the perfect setting, but the water will be much hotter once it is found.

Another thing that can be done is to install a low-flow shower head. These types of shower heads restrict the flow of water, which can make the water feel hotter. Finally, insulating the pipes that lead to the shower can also help to keep the water hot. By taking these steps, anyone can enjoy a hot shower.

Why Should You Make Water Hotter in Shower?

Many people believe that hot water is bad for your skin and hair. However, there are actually several benefits to showering with hot water. Hot water can help to open up pores and remove dirt and oil. It can also help to relax muscles and relieve pain.

In addition, hot water can boost circulation and improve blood flow. As a result, showering with hot water can leave you feeling clean, refreshed, and invigorated. So the next time you step into the shower, don’t be afraid to crank up the heat!

7 Steps to Follow on How to Make Water Hotter in Shower

Step 1: Undo Any Low Water Flow

Unscrew the Face of the Shower Head

Undo any low water flow restrictors in your shower head. These little devices are often put in shower heads to save water, but they lower your shower water pressure. To find out if your shower head has a water flow restrictor, unscrew the face of the shower head and take a look inside. If you see a small disk or screen, that’s the water flow restrictor. Remove it and screw the face of the shower head back on.

Step 2: Check Your Hot Water Heater

If your water heater is set too low, it can make your shower water lukewarm at best. To check your water heater, find the thermostat on the side of the tank and turn it up to at least 120 degrees Fahrenheit.

Step 3: Flush Out Your Water Heater

If your water heater is more than a few years old, it might be full of sediment that’s preventing hot water from flowing freely. To flush out your water heater, attach a hose to the drain valve at the bottom of the tank and open the valve. Let the water run until it’s clear, then close the valve and detach the hose.

Step 4: Replace Your Shower Head

If you have an old shower head, it might be time for a new one. Newer shower heads often have higher flow rates, which can significantly affect how hot your shower water is.

Step 5: Install a Water Booster Pump

Install a Water Booster Pump

If you live in an area with low water pressure, a water booster pump can help. These pumps are installed in line with your water supply and help to increase water flow to your shower head.

Step 6: Use Hotter Water When Washing Dishes

If you have a dishwasher, use the hot water setting when running it. This will help heat up the water in your pipes, making your shower water hotter.

Step 7: Insulate Your Pipes

If your pipes aren’t well insulated, they can lose heat as the hot water travels through them. You can buy pre-cut pipe insulation at your local hardware store to insulate your pipes. Cut the insulation to size and wrap it around your pipes. You can also buy self-adhesive pipe insulation, which is even easier to install.

That’s it! You’ve now learned how to make water hotter in shower. By following these steps, you should be able to enjoy a hot shower in no time.

10 Tips for Making Your Shower More Enjoyable

Find the Perfect Showerhead
  1. Find the perfect showerhead. There are a variety of showerheads on the market, so take some time to find one that suits your needs. Consider factors like water pressure, spray pattern, and whether you want a handheld or fixed showerhead.
  2. Invest in a good shower curtain. A quality shower curtain will be durable, waterproof, and stylish. It can also help to keep your bathroom floor clean and dry.
  3. Use a shower mat. An anti-slip mat will provide a safe place to stand while you shower and help keep your bathroom floor clean and dry.
  4. Choose the right temperature. Not too hot, not too cold – just right! The perfect shower temperature will depend on your personal preferences, but it’s generally best to err on the side of caution to avoid scalding or chilling yourself.
  5. Don’t forget the soap! A good body washes or bars of soap can help to make your shower more enjoyable by leaving your skin feeling clean and refreshed.
  6. Exfoliate regularly. Sloughing off dead skin cells not only feels great, but it also helps to prevent ingrown hairs and improves the appearance of your skin overall. Just be sure to use an exfoliating product that’s gentle enough for your skin type.
  7. Shave carefully. Shaving is a necessary evil for many of us, but it doesn’t have to be a painful experience. Take your time, use a sharp razor, and don’t forget the shaving cream!
  8. Hang up your wet towel. Nothing ruins a relaxing shower like stepping out into a cold, wet towel. To avoid this unpleasantness, simply hang up your towel before you get in the shower, so it has a chance to warm up while you’re lathering up.
  9. Listen to music or audiobooks. Listening to music or audiobooks can help you relax and enjoy your shower even more. Make sure to choose tunes or stories that won’t distract you from getting clean!
  10. Take your time. One of the best ways to make your shower more enjoyable is simply to take your time. Savor the moment and relax!

Instead of rushing through your shower routine, take a few extra minutes to enjoy the experience. Afterward, you’ll feel refreshed and invigorated. Ready to tackle whatever the day may bring.

How to Troubleshoot When Your Water Isn’t Hot Enough in The Shower

There’s nothing worse than getting into the shower only to find that the water isn’t as hot as you’d like. Luckily, there are a few things you can do to troubleshoot this problem. First, check the water heater to ensure it’s turned on and set to the correct temperature. Next, see if there are any leaks in the hot water line.

Don’t Forget the Soap

If there are, they’ll need to be repaired before you can get hot water. Finally, check the shower valve to ensure it’s turned on all the way. If it’s not, turn it until the hot water starts flowing. By following these simple steps, you should be able to get your hot water back in no time! Keep reading for more information about how to make water hotter in shower.

Should I Be Adding Something to My Hot Water to Make It Hotter?

If you’re trying to figure out how to make your hot water hotter, you can do a few things. One easy option is simply turning up the temperature on your water heater. This will ensure that your water is hot when it comes out of the tap. However, it’s important to be careful not to turn the temperature up too high, as this can be dangerous.

Another option is to add a hot water booster to your plumbing system. This will help ensure your water is always as hot as you want it to be. Finally, you can also install a recirculating pump, which will send hot water through your pipes and back to your water heater, keeping the water hot all the time. With a little effort, you can ensure that your hot water is always as hot as you want it to be.

Why Doesn’t My Hot Water Get as Hot as It Should in The Shower?

The water heater is set at 140 degrees Fahrenheit, but the showerhead’s water is only lukewarm. Why? Well, there could be a few explanations. First, check the temperature of the water heater. If it’s set below 140 degrees, then that’s your problem—simple as that. However, if the temperature gauge is where it should be, there are a few other potential culprits. One possibility is that the hot water line leading to the shower is too small in diameter.

This can cause a drop in water pressure, which results in lower temperatures. Another possibility is that the hot water tank itself needs to be replaced. Over time, sediment can build up in the tank, restricting heat transfer and resulting in lukewarm showers. Whatever the cause, there are a few easy solutions that can help you return to enjoying hot showers again.


You can make your shower water hotter in a few different ways. By turning up the water heater, using a shower head with a higher flow rate, or insulating your pipes, you can enjoy hotter showers in no time. Just be careful not to overdo it, or you could scald yourself! Thanks for reading our post about how to make water hotter in shower.

Leave a Comment