You’re likely familiar with water meters if you live in a city. These little devices track how much water your household is using and are used for billing you for your usage. However, if you’ve ever needed to read your meter or access the valve that shuts off the water to your house, you may have found yourself struggling with a pesky water meter lock. In this post, we’ll show you how to unlock a water meter lock quickly and easily!
There are a few reasons why it’s important to unlock your water meter lock. First, if you need to read your meter, you’ll need to open the meter lock. Second, if there’s ever a problem with your water meter, you’ll need to be able to access it to fix it. Finally, if you ever need to turn off the water to your house, you’ll need to unlock the meter lock.
Required Materials
- A key or wrench that can fit the meter lock
- A bucket or other container to catch water
You’ll need a few simple tools to unlock your water meter lock. You’ll need a screwdriver to remove the screws that hold the meter lock in place and a wrench to loosen the valve shut off the water to your house.
How To Unlock a Water Meter Lock Step by Step Guide
Step 1: Find a Suitable Screw:
The first thing you need to do is find the screws holding your water meter lock in place. Most of these screws are located on the side or front of the meter, but how you’ll access them will depend on how your water meter is installed in your house. Generally, you should be able to access these screws by removing the panel around your water meter.
The water meter is typically located near the front of your house and can usually be found by following the waterline. If you can’t find the waterline, you may need to call a professional to help you locate and unlock your water meter lock. If you can’t remove the screws yourself, you can ask your neighbor for help. Have them use a screwdriver to remove the screws holding your water meter lock in place.
Step 2: Place the Screw:
The next thing you need to do is get a screwdriver and place the screw close by. This will make it easier for you when removing your water meter lock, making sure that it comes off easily. If the screws are stuck, you may need to use a lubricant like WD-40 to help loosen them up. If the screws are too tight, you may need a wrench or pliers to get them loose. Once the screws are loose, you can remove the water meter lock and replace it with the new one.
Step 3: Rotate the Screw:
Now that you have your screw ready to go, all you need to do is rotate it in a counterclockwise direction. You must be careful how much force you use when doing this because the threading on the screws can be easy to strip if you’re not careful. Also, note that some water meters will require two screws to be rotated, and it’s best to turn them in equal amounts. A Phillips head screwdriver is best suited for this task. A flat head screwdriver can be used to alternate the Phillips head screwdriver.
Step 4: Release the Screw:
Once you’ve done this, the next step is to move on to releasing your water meter lock. The easiest way to do this is by getting a screwdriver, put it in between the metal latch that holds the lock, and prying it open. Keep turning your screwdriver until your water meter lock pops off and allow the water to flow freely.
Step 5: Remove the Old Screws:
Once you’ve located the screws, you need to remove them. This may be a bit more difficult than it sounds since water meter locks are secured with screws that have been placed in their super tight. However, a simple way to remove these screws is to begin by applying upward pressure on the screwdriver to create tension. Next, use your free hand to turn the screwdriver.
This will apply even more pressure and make it easier to remove the screws. If you’re having trouble removing these screws by turning them with your fingers, use a pair of pliers to hold onto the screws while you turn out each one.
Step 6: Loosen the Meter:
Once you’ve removed all of your screws, you can use a wrench to release the lock. It may take some effort since meter heads are often made of very thick metal but keep turning until it’s completely loose from their socket. You might even have to push your water meter down into the ground to better grip it. Just be careful not to do this too hard; you don’t want to break the water meter or get it stuck in the ground.
Step 7: Unlock Your Water Meter:
Now that your water meter is released from its socket, all you have left is unlock it. The best way to do this is to take the lock apart so that you can access your meter’s core. To do this, unscrew the blue cap! Most of these locks are held together with just one screw, making them relatively easy to remove.
Step 8: Unlock Your Meter:
Finally, all how have left to do is unlock your water meter. To do this, turn the core clockwise until it pops up from its locked or unlocked position. Once you’ve done that, your water meter will be completely unlocked and ready for action!
Now that your water meter is unlocked, you can turn it on by rotating the core clockwise until it pops up from its locked or unlocked position. Once you’ve done that, your water meter will be completely unlocked and ready for action!
The other thing you should consider for this project is how to dispose of your old water meter lock properly. Don’t just throw it in the trash, as it could potentially cause environmental damage. Instead, please take it to your local recycling center so that they can properly dispose of it. Keep reading for more information about how to unlock a water meter lock.
You Can Check It Out to Bypass a Water Meter
Water Meter Tap Lock:
How do you arrange to pay for it when you have moved into a home with the water supply taken care of by meters? How do you get usage records? And how do you know how much it costs?
The first thing is to contact your local water supplier. You are now responsible for the outside water supply to your home. It is no longer just how much water you use but how much you pay for the privilege of using it. And how does your supplier know how much water you have used?
Your local water supplier will send an engineer around in a van with a strange lock on its side. This is how they get access to your water supply. So how do you gain access by fitting a lock on the meter that stops anyone else from getting access to it?
You need a key, and how do you get one? The answer is simple: you have to ask for one! This will cost £20, so make sure if you will use the lock.
How to Turn Off Water Lock and Eject Water?
To turn off the water lock and eject water from the meter, insert the key into the keyhole and turn it to the left. To install the water meter lock, insert the key into the keyhole and turn it to the right until it stops. You can then remove your hand from around the mouth of the keyhole.
If you are still having trouble with your water meter lock, contact us at Emerald City Plumbing for help! We can get that pesky water meter lock out of your way in no time.
Does Anyone Know How To Remove a Water Meter Lock?
If you have trouble removing a water meter lock, contact your local water supplier for help. If they cannot help, Emerald City Plumbing can remove a water meter lock and gain you access to your water meter.
Can I Cut the Lock Off My Water Meter?
No, cutting the lock off a water meter is not legal nor advisable. Water meters are typically owned and maintained by the water utility company, and tampering with them is considered a criminal offense. Additionally, cutting the lock off a water meter can cause damage to the meter and potentially disrupt the service for your entire neighborhood.
Is It Hard to Remove Maynilad Water Meter Lock?
Removing a Maynilad water meter lock can be difficult and is not recommended. The locks are installed to prevent tampering or illegal connections to the water supply. Attempting to remove the lock without proper authorization or equipment can cause damage to the lock or water meter and may result in legal consequences. If you need a lock removed for a legitimate reason, contact Maynilad for assistance.
What Can Happen if I Cut the Lock Off My Water Meter?
If you cut the lock off your water meter, you could face legal action interfering with the water supply. You could also be fined for not having a water meter lock. Emerald City Plumbing can provide a water meter lock that will give you access to your water meter without interfering with how the supplier manages your property.
There are several reasons why it makes sense to have a water meter lock from Emerald City Plumbing fitted. The main reason is how much money you could save when you know how much water you are using.
Conclusion
So there you have it! How to unlock a water meter lock in just three simple steps. If you’re having trouble, or if your municipality requests that you not tamper with the lock for some reason, be sure to call a professional locksmith. But now that you know how it’s done, you can save yourself a service call and get back to watering your garden or washing your car on your schedule. Thanks for reading – we hope this was helpful!
You Can Check It Out to Open Electric Meter Lock
